Monsterbeetle pro XL/XL

[RonW]

Hi RonW

So all done looking good so wheres the video then that's would be nice to see in action.
oh and how are your losi shocks holding up as im still thinking of getting a set would you tell me where you got them from thanks

mvg Lee

I bought the Integy losi shocks here in the netherlands on www.marktplaats.nl
The most riders here bought it from Ebay.

I have modifed the shocks,,,,
The pistons holes,,,,, I have driled them out!
4 holes of the piston to 1,5mm for the two front shocks.
6 holes of the piston to 1,5mm for the two rear shocks.
The front shocks with 1000 oil from FG
The rear shocks with 2000 oil from FG

 

[benckie]

looking good man very nice

 

[slawhammer]

Looking real sweet....I know there are many shocks out on the market to use
hope those work out for ya....are you using the piggyback version?I my self may have to
try some thing different again...The Fg shocks are not quit the answer...they work ok
better than what I had.....I will keep checking as to how those work out for you....
How you like that RN Pipe?........Slawhammer

 

[Kamitiro Fan]

Great job Ron, I really like it

 

[RonW]

Looking real sweet....I know there are many shocks out on the market to use
hope those work out for ya....are you using the piggyback version?I my self may have to
try some thing different again...The Fg shocks are not quit the answer...they work ok
better than what I had.....I will keep checking as to how those work out for you....
How you like that RN Pipe?........Slawhammer

The Integy MSR6 LST 7300 shocks I use, are with piggybacks.
My brother-in-law ride my car also,,,,
He say,,,,,,, awsome how the car works with these shocks!

The RN tuning pipe??????
There is no better pipe for a monsterbeelte.
The sound and the power are incredibel!!!!!
I tuned the gears for more topspeed but the car makes easly wheelies,,,,
No problem:2guns:

 

[benckie]

what do you do about the side chassis plates not lining up to the pull start and the gear plate, ive notived yours don't line up in your pic,s would this cause more rear endf flex and gear msh problems ?

 

[RonW]

!!

what do you do about the side chassis plates not lining up to the pull start and the gear plate, ive notived yours don't line up in your pic,s would this cause more rear endf flex and gear msh problems ?

In addition, an aluminum support comes between the motor and the chassis plates, i will made it myself.
I wait for the Elcon drivetrain, because this have other assembly points.
The drive now is not a problem.
The marder and MB have not this sideplates, so no problem at all!
Only the MT, MB pro, Hummer and Jeep have this sideplate!
The bolts are only in the sideplate because otherwise the wheels would get in the car.
I tried with the standard rear arms.
Now it is wider, its is no problem more!

 

[pipeous]

What an enjoyable read for my morning coffee. Amazing work you have done with this.

 

[RonW]

!!

Thanks,,,,,

The car has already 7 times go out for a ride!
Doing well, only the bearings of the layshaft have gone broke.
(old bearings were last season)
And the clutch spring is broken.
But this is in stock,,,, no problem,,,,,
Just 6000 rpm spring going on it again

The car rides very good!

 

[RonW]

MB pro XL/XL

The foto's off my ride here in the Netherlands.

 

[corecrusher]

great looking car great photo shoot.
Hi Ron nice to see u again

 

[RonW]

Thanks man!:scared:

I have already made modifed parts for this Beetle,,,,
I will soon place photos of this parts.

The parts I have changed:
New exhaust aid
Elcon CLEON bumper (with homemade scratch plate)
FG rear bumper (with homemade scratch plate)
Elcon clutch
Wheel square 14mm hard anodized aluminium (rear)

Here already pictures from the scratch plate with gear protection for the rear end.

 

[RonW]

xl

So the updates off my car.
Elcon clutch.


Cleon bumper with a selfmade milled alu plate

Wheel square 14mm hard anodized aluminium

FG flens wheel nuts

Here a photoshoot from bashing my car!

 

[benckie]

looking good, some nice action shots there ! i forget what diff are you using

 

[RonW]

FG xl

I have the Hobbythek version.

CAUTION! By fitting!
The diff good justification and full of fat.
How thicker the fat in the diff, how better grip of the car.

This diff-conversion is provided including a thick diffhuls and dust-proof bearings.
This set is manufactured by hobbythek is very complete and a nice pric €49,50.

You can buy it from Ebay or from http://www.rc-car-online.de

 

[RonW]

mb pro xl

The Elcon drivetrain and diffbrake are on the way.
I think i have it saterday :clap:

 

[RonW]

Elcon

Yesterday I have one and another received from Krikke rc
About 17:15 hours the doorbell is ringing, and TNT delivers a small box.




Elcon drivetain en Elcon diffbrake.

So I can pretty busy these days ,,,,,,

 

[benckie]

some nice shinny stuff there

 

[Bigger the Better]

At some point you must run out of add on's, right? :laugh:

 

[RonW]

Wat bedoel je hier precies mee?:chinese: