My HPI 26 Baja 5b SS

[cbaker65]

i need sum 12mm inner id shims..?.r these a 12mm inner id shim?...12x18mm ones?
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/253287469547

Are you shimming a diff?

 

[evssv]

Are you shimming a diff?

no .need sum to go behind the pinny ?
which has a 12mm shaft ?

 

[mark35]

Them yeah Mike? ☝?
So the ID is 12mm and the OD is 18mm??

 

[evssv]

as the bell has a bit too much in/out movement ?

View attachment 54423
Them yeah Mike? ☝?
So the ID is 12mm and the OD is 18mm??

sweet..?...I'll get me a selection of thicknesses ?
od is not really relevant....?

 

[evssv]

My unmolested 5bss on the dudes kitchen side...we'd jus agreed on price an took me 1st pic ?

https://flic.kr/p/2hTe7pk

Almost total hpi stock all bar servos and a few braces ?

https://flic.kr/p/2hTfc9K

Oh how things have changed?

https://flic.kr/p/2hE5WNA

Bog stock?

https://flic.kr/p/2hTfmsK

https://flic.kr/p/2hTfnX3

 

[Z.hb71]

Its untouched....like me..... unfortunately ☹??

 

[evssv]

Then.....Virginal?

https://flic.kr/p/2hTekwh

Now.....deviant?

https://flic.kr/p/2hHq4ve

 

[Z.hb71]

Then.....Virginal?

https://flic.kr/p/2hTekwh

Now.....Abomination ?

https://flic.kr/p/2hHq4ve

Fek stock ? now it's so much better ?

 

[evssv]

Fek stock ? now it's so much better ?

So much?

 

[John Parks]

Then.....Virginal?

https://flic.kr/p/2hTekwh

Now.....deviant?

https://flic.kr/p/2hHq4ve

Have you used the power control clutches before? Have one from this g290 its brand new but never used one, planned on using ddm black magic gears but not sure how the hpi clutch is

 

[evssv]

Yeah its been on me baj for a few years now?along with the sf g32?...i do have it done up mega tight but everything seems ok?

 

[Seandonato73]

Isnt it like a slipper clutch?

 

[evssv]

Isnt it like a slipper clutch?

Exactly that?

 

[Seandonato73]

Thought so.

 

[1000Gsxs]

yeah thats me bearing tin?.....i jus buy cheapo bearings off ebay 10x a time if not too expensive?...or keep used ones if there still ok to use ?
new clutch on?

https://flic.kr/p/2hGc22J

managed to use the clutch tool even though its not a 32cc one....?
nothing i can do until i gets me bearings now ffs☹

Hi,
May be it's me but your clutch seems to be backward? If yes, is there a reason?

 

[evssv]

Hi,
May be it's me but your clutch seems to be backward? If yes, is there a reason?

is it?.....probably to get more wear outa it if it is..?.not even sure I've put a clutch in it in tbh so may of been last owner...?...i have now obv?

 

[DougStar]

Hi,
May be it's me but your clutch seems to be backward? If yes, is there a reason?

Clutch arrows facing out and anticlockwise ??

 

[mark35]

is it?.....probably to get more wear outa it if it is..?.not even sure I've put a clutch in it in tbh so may of been last owner...?...i have now obv?

My clutch is on reverse on my small bore, it bites harder with less slip.
It might have been me that originally put the clutch on backwards on that engine Mike. ??

 

[evssv]

My clutch is on reverse on my small bore, it bites harder with less slip.
It might have been me that originally put the clutch on backwards on that engine Mike. ??

ya know what....i did forget who i got it off ....?....still a ripper now?

 

[1000Gsxs]

Will try that sooooon