My mcd body unfinished

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Teejay112

Teejay112

Well-Known Member
Messages
355
Reaction score
288
Arrived today got this far and ran out of paint 20190330_202155.webp
 

Attachments

  • 20190330_202135.webp
    20190330_202135.webp
    50.7 KB · Views: 16
  • 20190330_202155.webp
    20190330_202155.webp
    35.7 KB · Views: 18
  • 20190330_202121.webp
    20190330_202121.webp
    77.6 KB · Views: 19
  • 20190330_115035.webp
    20190330_115035.webp
    102.5 KB · Views: 19
  • 20190330_202103.webp
    20190330_202103.webp
    74.6 KB · Views: 17
Z.hb71 said:
Looking good dude. One thing Id suggest is taking a file to the wheel wells, and rear bumper around were a diffuser would be, the cuts look rough.
Click to expand...
Yeah I should have done it before I started painting but I guess I'll leave that till last
 
Finished and added carbon fibre underneath the bumper also a pic of my max rpm with this rubbish exhaust I've lost 10000 rpm with this pipe
 

Attachments

  • 15545564717436984169893563092840.webp
    15545564717436984169893563092840.webp
    123.2 KB · Views: 10
  • 15545564884488157042114597572179.webp
    15545564884488157042114597572179.webp
    82.1 KB · Views: 10
  • 15545565028405772535234782853373.webp
    15545565028405772535234782853373.webp
    70.7 KB · Views: 9
  • 15545565250044312594749859204371.webp
    15545565250044312594749859204371.webp
    74.7 KB · Views: 10
  • 15545565976415431531520724568861.webp
    15545565976415431531520724568861.webp
    110.7 KB · Views: 13
  • 15545566971533320119475779910202.webp
    15545566971533320119475779910202.webp
    38.7 KB · Views: 13
Teejay112 said:
Finished and added carbon fibre underneath the bumper also a pic of my max rpm with this rubbish exhaust I've lost 10000 rpm with this pipe
Click to expand...

How much rpm did you loose? Not 10000 that's for damn sure. The max rpm for that engine is 16500 per their website. You may have gained a little bit with a good pipe but not 10k.

"Rovan 45cc 2-Stroke Gas 4-Bolt Engine designed to fit the Rovan LT, SLT, KM X2 and LOSI 5IVE-T
MPN: RV810221
NEW ROVAN SPORT (ROFUN) 1/5 Scale 45cc 2-Stroke Air Cooled 4-Bolt Engine (43mm bore, 31mm stroke)
  • Special HD Design Easy Pull Heavy Duty pull start system works great and has a nice big handle making this a pleasure to start
  • 8000 RPM clutch installed.
  • Walbro WT 1107 Carburetor
  • Very Powerful 45cc air cooled 4 bolt head, two stroke motor well over 4HP and tons of low end torque over smaller engines
  • 16500 MAX rpm
  • New style cylinder head.
  • Runs on High octane pump gas with 25/1 two stroke oil mix
  • Ready to bolt right in
  • Huge oversize exhaust port
  • Some exhaust systems mounting holes may need to be elongated to make fit on this engine
  • Some cutting/grinding of the rear chassis brace may be required for this to fit
Can fit many 1/5 Scale RC vehicles like HPI, LOSI, FG Rovan King Motor, Red-Cat etc... (Check out my other listings for one designed to fit the HPI Baja, Rovan and King Motor Buggies and Trucks 1/5 scale vehicles, part number 810221)"
 
Back
Top