Has anybody put a rc max motor in there vekta ? Really need some info , before I dive into Oblivion , how does the fitment go on this project , and what problems might there be they say it goes right in with some Minal trimming
Rcmax for vekta. ?
- Thread starter Relic-1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
https://www.detroitperformancerc.com/product-page/rcmax-46-vekta-package
sure they will have all the info
sure they will have all the info
- Messages
- 19,475
- Reaction score
- 27,691
yes, a lot of people have. if u go down that route id just get their 48-55 instead of the 90cc-65-71cc because those motors are really really overpowered, but if ya do want that much power be my guest. just my 2 cents
- Messages
- 19,475
- Reaction score
- 27,691
LOL! i was gonna use a cheap 11hp cylinder until I got an extra hundred bucks so i went 18hp LOLLOL!!!says he with the 70cc in the wings
You see he doesn't mention the 70cc in the ones not to get. He says 71cc. Lol?LOL!!!
- Messages
- 19,475
- Reaction score
- 27,691
LOL!!!
Oh so 71 big NO NO! 70 IS OK .......right got y
- Messages
- 19,475
- Reaction score
- 27,691
yeah its really big difference believe meOh so 71 big NO NO! 70 IS OK .......right got y
- Thread starter
- #11
Well now that we got u guys figgered ,how's the fitting into vekta with the rc max motors , they say they hook right up to tranny n stuff , any truth to that ?
- Messages
- 19,475
- Reaction score
- 27,691
pretty sure they do but don't expect that stock tranny or diffs or driveshafts to handle the power.
Detroit performance offere load of trany upgrades with ther packages. And vertigo so should be good
Im sue it will fit straight off
Im sue it will fit straight off
Last edited:
- Thread starter
- #14
I got financially caought up in this gravedigger build I'm doing , this summer I'll be going R C MAX ! I mean jeeeeeze ! You get a hat !??
Is it a wise move putting that in there 
??
??
- Messages
- 19,475
- Reaction score
- 27,691
absolutelyIs it a wise move putting that in there
relic, what rcmax u gunnna put in there? 46, 50, 55, 65, 71, 90??? which one??
- Thread starter
- #17
I was gonna try to stay on the ground , so I'm doing the 46 , can't believe the thing, what a piece of art and machined power , really looking forward to it , I'm gonna put the lozi thing on the back burner for now , got some big jobs comeing up , then I'll be ready ,,,,, FOR THAT NEW HAT !!
- Messages
- 19,475
- Reaction score
- 27,691
Awsome! You'll love that motor!
PS: I serverly doubt anything can make a vekta wheelie no matter the power. Even the rcmax 90.
John Parks
Print my own
- Messages
- 4,151
- Reaction score
- 9,679
Personally I'd do a 55/65. A 46 is decent but a vekta is heavy. Many go with a 65 as the power curve comes on slower so its easier on the drivetrain.
- Thread starter
- #20
Well that's very interesting ,I like that piece of wisdom , I was watching a video of some spoiled brats in England , they had a big group of guys that all had the max stuff , they tore up a golf course compleatly , but there rigs we're loosing ground contact allot , just looked like they were over powered , but I'm not scared ,I just might go with the 65 , so excited , I have to not think about it for a couple months ,, that darn money thing !!