Redcat Racing Rampage XB Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
The set screws on the lay shaft carrier could be screws in too far and putting pressure on the brake plates causing it to over heat the discs
 
BertR said:
The set screws on the lay shaft carrier could be screws in too far and putting pressure on the brake plates causing it to over heat the discs
Click to expand...
Please explain to the less knowledgeable....me.
 
There is 2 long grub screws on the pinion side of the break lay shaft suport...the part with a bearing next to the center diff. If you take the top cover over the center diff you can access the screws . get a flashlight and look at it from the left side and you will see them. In one pic of yours you can see the holes
 
What is the process of removing these two gears from the plate? Also, where can i order replacements?



 
Redcat Racing Rampage XB Questions

For parts, check redcatracing.com or davesmotors.com (daves has better prices but they don't have all the small parts).

Also, I would look into either a belt drive or at the very least upgrade your gear plate to metal (from the MT or Dunerunner, not 100% sure if direct fit on the XB, maybe others can chime in) to minimize the risk of shaving more gears
 
Not sure about that, maybe someone that actually has the belt drive can help with that.
 
Its coming from Germany, so its going to be some time lol. I did google translation, here is what the kit comes with:

Included:

2x pulleys respect the grub screws of the toothed discs necessarily tighten screws securing screws or paint !

1x diverting pulley

1x timing belt HTD ( Made in Germany )

1x cover 2mm thick polycarbonate

6x VA grub screws

1x fitting instructions

I also submitted an offer for $74 and he accepted.

I will be buying this to go along with it:

http://www.rampageshop.com/store/p364/704568_%C2%A0_Blue_Aluminum_Gear_Plate_with_Bearings.html
 
dsm600rr said:
Its coming from Germany, so its going to be some time lol. I did google translation, here is what the kit comes with:Included:

2x pulleys respect the grub screws of the toothed discs necessarily tighten screws securing screws or paint !

1x diverting pulley

1x timing belt HTD ( Made in Germany )

1x cover 2mm thick polycarbonate

6x VA grub screws

1x fitting instructions

I also submitted an offer for $74 and he accepted.

I will be buying this to go along with it:

http://www.rampageshop.com/store/p364/704568_%C2%A0_Blue_Aluminum_Gear_Plate_with_Bearings.html
Click to expand...
Thanks for that DSM
 
Back
Top