Spur and Pinion

[RC Master]

I have a Losi 5T 2.0

I would like to increase the pinion to 23 and decrease the spur (don't know the match for this?) and what parts do I need to change I am fully stock parts now.

And where to buy it online please, thank you

 

[DougStar]

Vertigo spur gears and pinions @ DDM
Here is a matching chart

 

[RcJunkie13]

and what parts do I need to change

Just the pinion and mesh plate (or get adjustable). You can get on ddm, ill post up a link a little later
OK so it looks like 22 is the max you can put with the stock spur otherwise you will need to go down to 58t spur if you are going to use the inserts

 

[Seandonato73]

Better have more then a stock engine in it to pull 23/58. Your gonna work the dog out of the clutch and have some miserable bottom end.

 

[Rep732]

I have a 22t on the 62t spur but im running a fs full steel clutch and a "full mod" 34cc engine... hits 50 mph +/- .. trust me its plenty to get into trouble with... and with every pinion you buy you must get the corresponding inserts. I have 19 through 22t pinions and matching inserts. The sweet spot like I was told is 21 but 22 does just fine but you will need a better engine if you wanna dabble with taller gearing

 

[Seandonato73]

Throw the inserts in the trash and use washers on the bolts, setting mesh isnt hard.
Those inserts are one of the few things I don't like on the 5ive platform.