The 🐙 krakenbone beater 🤣

[DougStar]

Off come the ufc clutch and on goes a zen with an 8k spring as requested for the test

 

[DougStar]

So iv started putting the 4.8 hp‍♂ back in the chassis

 

[DougStar]

So my little beast just got 140g light after installing a blackbone 55 spur and carrier and removing the hpi gear cover

 

[RcJunkie13]

did u switch to a lipo yet, also maybe the tfe battery box eliminator could prob save some weight

 

[DougStar]

did u switch to a lipo yet, also maybe the tfe battery box eliminator could prob save some weight

I have a couple baja lipos I could use snd the eliminator is a good idea

 

[DougStar]

did u switch to a lipo yet, also maybe the tfe battery box eliminator could prob save some weight

I switched to the lipo put both packs on the scales hump =350g lipo= 149g so the blackbone spur and lipo shaved of 350g or 0.77lb

 

[DougStar]

There are gonna be some updates coming (never seen before) and getting prepped for it. Added a UFC blackbone bell and 10k spring new rcmax gear plate so I can run my new gears. Got to get the new clutch bedded in

 

[MonsterAir]

Any updates for us???

 

[DougStar]

Yes there is an update didnt take any pice as iv done this and pots pics loads stripped the quick diff rebuilt the diff (new irc) with 500k and blackbone gears installed a ufc clutch and bell.
Photos are not permitted at this point you'll just have to take my word for it

 

[MonsterAir]

I trust you know how to rebuild a diff but I was asking about these "never seen before" updates?

There are gonna be some updates coming (never seen before) and getting prepped for it.

 

[DougStar]

I'm working on it off Friday and Monday so ill be filming

I trust you know how to rebuild a diff but I was asking about these "never seen before" updates?

 

[DougStar]

never seen before

asking about these "never seen before" updates?

 

[MonsterAir]

I seen the release vid on YouTube a little while ago. Looks like an awesome engine. Let's see her rip!

 

[DougStar]

I seen the release vid on YouTube a little while ago. Looks like an awesome engine. Let's see her rip!

Taylor rc 35cc teaser rip
https://www.instagram.com/tv/CYLL7ARKd03/?utm_medium=share_sheet

 

[MonsterAir]

Oh that was you in the Taylor RC teaser vid? I had thought those cart wheels had that DougStar flair

 

[RcJunkie13]

I KNEW I SAW UR BAJA IN THERE

 

[RcJunkie13]

Why don’t u toss this motor in the l5b and show us what it does in a 4wd. Also are the ports all the same size as g320? How does it really compare to the 34 reed?

 

[DougStar]

Why don’t u toss this motor in the l5b and show us what it does in a 4wd. Also are the ports all the same size as g320? How does it really compare to the 34 reed?

Yeah the losi is next ports are all the same as a G320, so the pipe is the one from my obr motor the only real difference is the clutch housing bolt hole are G290 so Taylor housing or vertigo universal will fit. This motor spanks my obr sidewards never needed a wheelie bar before

 

[szaki75]

it has an exhaust bridge so the exhaust port should be wider i assume, while the exhaust flange is the same as on the g320.
great engine, but it’s a pity that i need to spend my funds for other things at the moment

 

[DougStar]

Pitty your $$$ is spent for now lucky though its still pretty cheap so I'm sure its still in reach later

it has an exhaust bridge so the exhaust port should be wider i assume, while the exhaust flange is the same as on the g320.
great engine, but it’s a pity that i need to spend my funds for other things at the moment