Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
on which rc mate?Picked up a standard size servo to replace my throttle servo and it is to small to fit on the tabs. Hitec 954SW. Is a standard size servo the wrong servo? Thanks
the hitec should be a direct fit then mate,Lol. Just realized I didnt add that part. Thanks rovan baja 5b
I do appreciate your repliesInteresting, this is out of my league as I don't own a baja but we can get @Z.hb71 in here to help or @John Parks
two options really mate,Im not asking about a steering servo. I understand throttle/ brake servo are the same was just to lazy to type throttle/brake servo but thank you. Servo in question.
View attachment 84456View attachment 84457View attachment 84458
The D845 fit up with minimum issue. Just a little flex on the mount.
View attachment 84459
Appreciate all your replies as well lol. Thought I picked the right servo for zero modifying, oh well. Picked up some fullforce servo clamps so ill get it to work.two options really mate,
1; just modify the tabs a little on the servo so it fits,and use a flat washer on top of the servo tab,(obviously at your own risk)
or use the servo rubbers without the brass inserts and use a flat washer on top of the rubbers which will give you a little wiggle room on the screws,
the servo being a little short has always been an issue on the baja when fitting replacements ,
its just that different servo makers all seem to have a different idea of what a standard size servo is mate , the hole spacing i mean,Appreciate all your replies as well lol. Thought I picked the right servo for zero modifying, oh well.
Bit late to the party here but just listen to spentstwo options really mate,
1; just modify the tabs a little on the servo so it fits,and use a flat washer on top of the servo tab,(obviously at your own risk)
or use the servo rubbers without the brass inserts and use a flat washer on top of the rubbers which will give you a little wiggle room on the screws,
the servo being a little short has always been an issue on the baja when fitting replacements ,
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.