- Messages
- 17,175
- Location
- Crafers South Australia
- Thread starter
- #781
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I agree here. Also try lowering a bit. I can't believe there are no jumps on that track. Looked like you was having fun tho. Good work! Please put that losi back out there!Looks like it wasnt doing too bad. I have a suggestion for your suspension if you'd like to try it out. It seems you get a good bit of bounce over the jumps, and rough spots. Which is tossing you about and taking you off your line. I would try either softening up the rear suspension a bit, or trying a bit heavier shock fluid in the rear. Also idk if you can set bias for front to rear diff, but the front doesn't seem to be pulling you around the turns very well, it looks more like a push if you will. Im no expert for track set up, so take it for what it's worth. Just looked like a lot of power wasnt getting to the ground with how it was handling to me.
Cheers Sean ?? the way the fg is setup, it has no center diff ?? it has a belt so its like having a locker? so no bias and the diffs don't get filled with silicon just a bit of grease?? as for the shocks id for now reduce the preload??Looks like it wasnt doing too bad. I have a suggestion for your suspension if you'd like to try it out. It seems you get a good bit of bounce over the jumps, and rough spots. Which is tossing you about and taking you off your line. I would try either softening up the rear suspension a bit, or trying a bit heavier shock fluid in the rear. Also idk if you can set bias for front to rear diff, but the front doesn't seem to be pulling you around the turns very well, it looks more like a push if you will. Im no expert for track set up, so take it for what it's worth. Just looked like a lot of power wasnt getting to the ground with how it was handling to me.
Was having a thrash?? id have to do some serious work on the losi? swap out the diff oils , 6k spring on the clutch , change spur and pinion back to 21/58 ? hack out the wind screen coz my biggest issue last time was heat? the fg had 6k spring 26cc and doesn't care about heat as much??I agree here. Also try lowering a bit. I can't believe there are no jumps on that track. Looked like you was having fun tho. Good work! Please put that losi back out there!
Cheers Sean ?? the way the fg is setup, it has no center diff ?? it has a belt so its like having a locker? so no bias and the diffs don't get filled with silicon just a bit of grease?? as for the shocks id for now reduce the preload??
Was having a thrash?? id have to do some serious work on the losi? swap out the diff oils , 6k spring on the clutch , change spur and pinion back to 21/58 ? hack out the wind screen coz my biggest issue last time was heat? the fg had 6k spring 26cc and doesn't care about heat as much??
Got any footage??
No didn't take a camera with me.
I will next time.
I can work with that ?. Well get you the fastest fg in the oz.... take a few shots of how the shocks mount as well. Changing the upper angle will affect how it handles as well.Cheers Sean ?? the way the fg is setup, it has no center diff ?? it has a belt so its like having a locker? so no bias and the diffs don't get filled with silicon just a bit of grease?? as for the shocks id for now reduce the preload??
Was having a thrash?? id have to do some serious work on the losi? swap out the diff oils , 6k spring on the clutch , change spur and pinion back to 21/58 ? hack out the wind screen coz my biggest issue last time was heat? the fg had 6k spring 26cc and doesn't care about heat as much??
cant you go there by yourself? why do u haveta wait 2 weeks for everyone to show up?Made a few adjustments ??
lengthened the steering turnbuckles and the hub has couple connecting points ? moved up closer to the hub = less toe out?? this should help with steering overallView attachment 63633
Also reduced preload on all 4 shocks
should make for a smother ride ????
Now we wait two weeks?
View attachment 63634
They seemed to be alright ? ? cant say it was my biggest concern ? staying off my back and between the lines was all I could think about??? i could also change the bug to this for round the same outlay ?? RTR leopardDo those giant grips work good on the track? A smaller pin might help out with traction too.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.