Zenoah Engine Torque Specs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.
Here is another one with some more info. You can find it in the owners manual here on page 5 #6: http://www.zenoah.net/products/hobby/download/G230RC_G260RC_307.pdf

TIGHTENING TORQUE
Item, Screw Size, Standard (kg•cm), Limit (kg•cm)
Carburetor, M5 (P=0.8), 35, 30~40
Insulator, M5 (P=0.8), 35, 30~40
Clutch, M6 (P=1.0), 65, 50~80
Rotor, M8 (P=1.0), 130, 100~150
Cylinder, M5 (P=0.8), 70, 60~80
Crankcase, M5 (P=0.8), 65, 50~80
Spark Plug, M10 (P=1.0), 110, 100~120
Muffler, M5 (P=0.8), 90, 70~100
Fan Cover, M5 (P=0.8), 35, 30~40
Ignition Coil, M4 (P=0.7), 33, 25~40
Starter Case, M4 (P=0.7), 13, 10~15
Tapping Screw, TP 4.3, 25, 20~30

You can use this program to change the measurement from kg/cm to what type of torque wrench you own: http://www.nmbtc.com/Calculators/converter.swf
 
Last edited:
All specifications are either in the Zen or CY manual. The CY is all so in all the HPI baja manuals. Being a motorcycle mechanic and machinist for over 35 years I believe in proper torque. Have to wonder if some of the problems with the base gaskets on 2 bolt engines might be do to improper torque.
 
I am almost positive that was the problem in my 2 bolt. I lost that thing due to lean condition and very little dirt. I also think that choke plate for my 813 let in dirt as well. I will start it differently now.
 
sorry but these settings are wrong, you guys are forgetting the point between the numbers,
heres the correct ones from zenoahs website
http://www.zenoah.net/ddoc/ZENO/ZENO2010_EUenAPen/ZENO2010_EUenAPen_G240RC,270RC,290RC,EU_.PDF

MAINTENANCE
6) TIGHTENING TORQUE
Items Screw Size Standard (N·m) Limit (N·m) Remarks
Carburetor M5 (P=0.8) 3.4 2.9~3.9
Insulator M5 (P=0.8) 4.4 3.9~4.9 with Locktight glue
Clutch M6 (P=1.0) 6.4 4.9~7.8
Rotor M8 (P=1.0) 12.7 9.8~14.7
Cylinder M5 (P=0.8) 6.8 4.7~8.8
Crankcase M5 (P=0.8) 6.4 4.9~7.8
Spark Plug M10 (P=1.0) 10.8 8.8~12.8
Muffler M5 (P=0.8) 8.8 6.9~9.8
Fan Cover M5 (P=0.8) 3.4 2.9~3.9
Ignition Coil M4 (P=0.7) 3.2 2.5~3.9
Starter Case M4 (P=0.7) 1.3 1.0~1.5
Tapping Screw TP 4.3 2.4 1.9~2.9
 
sorry but these settings are wrong, you guys are forgetting the point between the numbers,
heres the correct ones from zenoahs website
http://www.zenoah.net/ddoc/ZENO/ZENO2010_EUenAPen/ZENO2010_EUenAPen_G240RC,270RC,290RC,EU_.PDF

MAINTENANCE
6) TIGHTENING TORQUE
Items Screw Size Standard (N·m) Limit (N·m) Remarks
Carburetor M5 (P=0.8) 3.4 2.9~3.9
Insulator M5 (P=0.8) 4.4 3.9~4.9 with Locktight glue
Clutch M6 (P=1.0) 6.4 4.9~7.8
Rotor M8 (P=1.0) 12.7 9.8~14.7
Cylinder M5 (P=0.8) 6.8 4.7~8.8
Crankcase M5 (P=0.8) 6.4 4.9~7.8
Spark Plug M10 (P=1.0) 10.8 8.8~12.8
Muffler M5 (P=0.8) 8.8 6.9~9.8
Fan Cover M5 (P=0.8) 3.4 2.9~3.9
Ignition Coil M4 (P=0.7) 3.2 2.5~3.9
Starter Case M4 (P=0.7) 1.3 1.0~1.5
Tapping Screw TP 4.3 2.4 1.9~2.9
Nah they were not wrong but in kg/cm the ones you posted are in N/m
 
Copied the latest specs from the latest engine here (G320RC)

G320TorqueSpecs.jpg

The "Cover, TR" is not valid for the smaller CC engines (does not exist on those)
 

Attachments

  • G320TorqueSpecs.jpg
    G320TorqueSpecs.jpg
    336.6 KB · Views: 66
Status
Not open for further replies.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks