Z's HPI Baja 5b/5t build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.
Yep. Are coils sensative enough to where a flywheel rubbing it would fek it?,
Wouldn't have thought so, the bolts backed out of my coil and it wouldn't idle or run but would start. After an hour decided to pull the covers off to have a look, bolts backed out, coil had been rubbing on the flywheel. I put bolts back in, gapped using business card and it fired right up.
I would clean up the face of the coil incase its contaminated or has build up of aluminum on there and try again.
 
Wouldn't have thought so, the bolts backed out of my coil and it wouldn't idle or run but would start. After an hour decided to pull the covers off to have a look, bolts backed out, coil had been rubbing on the flywheel. I put bolts back in, gapped using business card and it fired right up.
I would clean up the face of the coil incase its contaminated or has build up of aluminum on there and try again.
Ok I'll give that a go. I'll also Clean the flywheel
 
Status
Not open for further replies.
Back
Top