I was wrong. I had to get home and see the paper I wrote the different weights on. The gas MT the way I have it set up is 34.7 pounds, the MT brushless is 33 pounds.So gota b 20kg's then..ish....
So 15-16kg.So gota b 20kg's then..ish....
..they look heavier imo....
Hey man I wanted to update the single steering servo from the Spektrum S9020 to a Hitec D845WP. The Spektrum by looking at torque numbers at 7.4v is stronger than the Hitec, but I shredded three gear sets in the Spektrum within a year. So I decided to try the Hitec. It is a much stronger servo internally than the Spektrum. Oh and to use these servos, buy the aluminum Futaba servo mount Redcat offers. It is bigger than the stock mount. If you look at the bottom of the chassis there are two extra predrilled and countersunk holes for this Futaba mount to screw down with. I rode out the dual stock servos till they broke internally, then tried the single servo setup. Good Luck!
Ya they do look heavier huh. Until I put it next to my Losi MTXL. I just got it a few weeks ago. Have yet to weigh it.so 15kg and 15.7kg....
...there huge....
...I could b wrong......16.8kg`s dry I`m guessing....same as a stock 5ive pretty much
.....
That is so cool
They are slightly modified drilling the center hole to fit 5th scale 24mm hex. Originally for the Xmaxx.
the trenchers
where can one get a belt drive I am not finding it?
I am looking for the beltdrive
not following
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!