myrcbud
Well-Known Member
- Messages
- 589
- Location
- Astoria, Oregon
Did you have to drill into the chassis for the servo mount?
As for the master cylinders, I would take measurements, transfer on some scrap material and drill holes into the scrap material. if your holes line up with the scrap and the footprint of the master cylinder, take the scrap and transfer punch and mark the chassis. Done.
As for the master cylinders, I would take measurements, transfer on some scrap material and drill holes into the scrap material. if your holes line up with the scrap and the footprint of the master cylinder, take the scrap and transfer punch and mark the chassis. Done.