Brake upgrade for T2.0

[mj.jafari]

What are your suggestions for a brake upgrade that fits 2.0 , I bought this and despite drilling the pad holes as per the instructions on the link, still doesn’t fit on T 2.0 as the pads are too thin for the gap between the disk and the pads.
https://www.davesmotors.com/sm602rcrbrakesforlosi5ive

 

[Rep732]

Need thicker discs or put shims in front of the outside pad to take up the space..... im sure you can figure it out .........

 

[gavsta72]

Adjust the brake/servo links and reset your end points

 

[DougStar]

I would not have changed the brakes losi stock setup work just fine

Adjust the brake/servo links and reset your end points

+1

 

[Rep732]

Can't do that as the brake cam will go full travel and still be ineffective at stopping. You MUST take up the slop with SHIMS.

 

[Z.hb71]

Need thicker discs or put shims in front of the outside pad to take up the space..... im sure you can figure it out .........

Can't do that as the brake cam will go full travel and still be ineffective at stopping. You MUST take up the slop with SHIMS.

 

[Milo]

Unfortunately we’ll never know. This guy never posts back or shows any gratitude for the advice given.

 

[niz55]

I used o rings as shims and they have been working great for over 4 tanks now. Another benefit is they keep the brakes quiet due to vibration.