WVNed
Well-Known Member
- Messages
- 54
- Thread starter
- #21
I got my Super Bee from the Killer RC website
http://www.killerrc.com/product/super-bee-kill-switch-car-kit/
http://www.killerrc.com/product/super-bee-kill-switch-car-kit/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I tested every scenerio possible and everything works as it should. Mine has an LED mounted in the radio box showing if it's armed. Shuts off the engine with ch3, signal loss, and comes with jumpers to vary the low voltage shut off point.Scruffy;
Have you tried turn off the Tx while it sits on idle, or disconnect the wire that goes to the ignition and see if the engine turns off? (don't mean manually arming the KS)
Or turn off the rx while the engine is running?
Mine will only kill the engine if I select channel 3, but otherwise doing the above will keep the engine running.
I've been running the turtle racing HD v2 full clutch system for a while now. Just installed ACER ceramic bearingsI'm using the KM version in orange, nice piece and cheap.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.