Complete overhaul

[Gino-CH]

Its a very good way to learn whats goning on with your rig rebuild
Obr 34 is a good option zen 32 is also a very good and half the price option
don't forget to post more pics

Thanks Dougstar!

Nice rebuild dude....my drive train is stock and holding up well with the obr34v2

Thanks! I kept the drivetrain fully stock as well but did replace it pretty much completely. I’ve been looking at the OBR engines - challenge is going to be to get one over here in Switzerland

 

[DougStar]

Nice you have a mini id just take it easy on the bumpers coz they have been discontinued. should have have some made before yours are too used
I live in south africa and had an obr shipped to me

 

[Gino-CH]

Just got a reply from the shop - indeed they ship to Switzerland but import duties are unclear and of course for my account.

I know about the bumpers. I have stocked up on them by buying the left over of a dealer in UK. I have also 2 spare bodies. What I couldn’t find anymore are the cage parts that sit underneath the bumpers. Still somehow I am not really bashing with the mini; that’s more for the 5iveT and the Baja 5B which I just finished building.

 

[DougStar]

I think i payed $60 shipping plus 15% was the customs so not he cheapest but i can live with that
Rc car online de have mini bodys but no bumpers they may have cage bits i haven't checked

 

[1Coopgt]

OBR does not have a magical coating they just use the coated Zenoah parts. The case is definitely not coated as it is billet and cut by Turtle racing. I race with Dan and he built my 32cc SS motor. It is amazing! I run the 990 carb on mine, and I do race on a track. The piston port motors tend to like the 1107 a tad bit more but either carb will do fine. The pipe is every bit as important as the motor. Top end goes to victory, Bart is a good bottom end pipe but falls off and Olimat is the mid range pipe that never seems to stop pulling as the revs go up.

learning question . How much of a difference would any of these 3 pipes make over the DDM Dominator V2 Pipe?

 

[Frenimy]

Depending on the motor you are running will determine how much gain you will see over the DDM pipe. While the DDM pipe is not terrible it is not as well suited to the higher HP motors that really need a good timed exhaust pulse that allows them to really breathe. The losi pipe is kinda the same way. It is ok on a stock motor but fails in comparison on a mod motor.

 

[1Coopgt]

Depending on the motor you are running will determine how much gain you will see over the DDM pipe. While the DDM pipe is not terrible it is not as well suited to the higher HP motors that really need a good timed exhaust pulse that allows them to really breathe. The losi pipe is kinda the same way. It is ok on a stock motor but fails in comparison on a mod motor.

Thanks for replying back to me . It's going on an OBR 34V2 reed case . Just placed the order for the Olimat . Figure from your other post the Olimat would be best for all around running.