- Thread starter
- #121
No sorry got my wires crossed to the shell. But this shell seems softer than the losi one .......lets say more give and id even say thicker
Doug`s Bug ( monster beetle pro )
- Thread starter DougStar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #122
took the bug out for a run today had a few issues lost a wheel
forgot to thread lock the adapters 
lost an oring that goes over a body mount but overall im quite impressed with my little 26 cc 2 bolt zen. bug has good enough power for now and i think ill put a hitec 845 in coz the steering could be better
took a few pic along the way
must do the mesh side guards hate loads of grass and
in everywhere
forgot to thread lock the adapters lost an oring that goes over a body mount
but overall im quite impressed with my little 26 cc 2 bolt zen. bug has good enough power for now and i think ill put a hitec 845 in coz the steering could be better took a few pic along the waymust do the mesh side guards hate loads of grass and
in everywhere
Looks good doug?
- Thread starter
- #124
Sweet
Cool
Gamefan
Reading the Rules!
Awesome Doug!
- Thread starter
- #128
When i got stuff for the bug i bought an fg pipe 6299 its a two piece. You get these parts as with it 
Red hose thing is a sleave that supposed seal the two halves
......its
Ive taken a bit of black silicon tube and made my own mod
Boiling water and painful fingers got this
has a real good seal now
Red hose thing is a sleave that supposed seal the two halves
......itsIve taken a bit of black silicon tube and made my own mod
Boiling water and painful fingers got this
has a real good seal now
Last edited:
- Thread starter
- #129
put mesh on the side guards looks ok
hope this will keep things a little cleaner it not going stop all of the coming in but im sure it will
help
i used silicon to stick it on
weighting it down until it sets
hope this will keep things a little cleaner it not going stop all of the
coming in but im sure it will help
i used silicon to stick it on
weighting it down until it sets
Gotta help keep some out ?put mesh on the side guards looks ok
hope this will keep things a little cleaner it not going stop all of the
help
View attachment 48718
i used silicon to stick it on
View attachment 48720
weighting it down until it sets
View attachment 48721
View attachment 48722
View attachment 48724
View attachment 48725
View attachment 48726
Squizzy Ralph
Member
- Messages
- 12
- Reaction score
- 14
Nice work on the mesh. Loving the equipment to hold it down lol 
. Let us know if it makes a big difference.
. Let us know if it makes a big difference.
- Thread starter
- #132
Yes got a bit of everything holding it downNice work on the mesh. Loving the equipment to hold it down lol
ill take it for a spin and see what happens
Gamefan
Reading the Rules!
Freakin awesome Doug! Now you are tempting me to go all out on my bug. ??
looks sweet that mesh dude.....
Love the look with the Mesh in there .
- Thread starter
- #136
You should go all out!
why not coz hell its fun
you have already add a few hopups buy some parts add them and take a load of picsAnd your rig will be better for it
- Thread starter
- #137
Thought id upgrade the steering servo with a hitech 845 i have but sadly it too big luckily i jhave a radio tray upgrade in the post and the position of the servo will change then fitting wont be an issue just have to be patient till then
luckily i jhave a radio tray upgrade in the post and the position of the servo will change then fitting wont be an issue just have to be patient till then
- Thread starter
- #138
went to the park test out the meshed side guards and i have to save 80% less junk in the bug so thats a +
this pic is after a full tank
found a small jump and was having fun decided to film a bit
landed up hitting a concrete block i had put my phone on and was just thinking
im gonna hit this thing!
heres what happened hit it with the front right wheel. i have a size ten/42 shoe here is a pic of the block
only thing that happened was a front drive shaft cam out body got a bit of damage but not bad at
all
put it back in went out again no worries
heres the damage to the body its on both sides
finished up with putting on the exhaust mount coz it was not as secure as id like
this pic is after a full tank
found a small jump and was having fun decided to film a bit
landed up hitting a concrete block i had put my phone on
and was just thinkingim gonna hit this thing!
only thing that happened was a front drive shaft cam out
body got a bit of damage but not bad atall
put it back in went out again no worries
heres the damage to the body its on both sides
finished up with putting on the exhaust mount
coz it was not as secure as id like
Exhaust mount looks like a nitro. LOL
- Messages
- 19,475
- Reaction score
- 27,691
Wow it does
Last edited: