Finally got one!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Am I missing some parts here ? The transmission came in just like this not even in a sealed packaging. The aluminum is also chipped in some places.

Seems like I am missing couple of parts here.

PXL_20210501_011035032.webp
PXL_20210501_011029649.webp
 
niz55 said:
Am I missing some parts here ? The transmission came in just like this not even in a sealed packaging. The aluminum is also chipped in some places.

Seems like I am missing couple of parts here.

View attachment 72945
View attachment 72946
Click to expand...
Where did you buy this? Did it come with you rcmax vekta kit?
You should have the the clutch bell, shaft and gears if so
 
Front plate I bought is option and I got that. Here is everything it came with. So I guess I am missing the special serrated washer and the vertigo shaft.

I bought it from detroit performance.
PXL_20210501_014121941.webp
 
So my kit came with these bolts and washers. Do I also have to use the spring washers?

PXL_20210508_190725242.webp
PXL_20210508_190729632.webp
 
So where does this go? It came with my vertigo rear tranny plate.

PXL_20210508_205033311.webp
 
Nevermind I found out. Googled the plate and this piece goes on the bottom of the plate to hold and align the rotor.

130666~2.webp
 
Man the 3 motor mount vertigo screws are crap. They should of used a 6mm like the stock ones.

Hopefully McMaster has some 12.9 grade ones.
 
Yep. I found some 12.9 on McMaster.


Edit ,

Actually that was the wrong size 5mm I was looking up . But when looking up 6mm no 12.9 grade.


Sorry what I mean was the flat head. They are both 6mm .
 
Last edited:
Haric is their a 90 degree concave insert that I can insert in bolt hole and use a regular socket head screws ?
 
Back
Top