Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I thought of that but, But the pipe will be almost touching the Throttle servo.Can't you just torque the mounting brackets a bit so it sits lower and clears your body?
So frustrated, The Brackets are as low as I can get them using the rubber bushing's I tryed every adjustment their isCan't you just torque the mounting brackets a bit so it sits lower and clears your body?
The body fits, but I'm afraid of it getting hot enuff to melt the body. Also not sure if it will get to hot and melt or damage the throttle servo arm. It sits about 3/8 of an inch from the arm. I have seen before other guys using this pipe. Not sure I like it.I'm not familiar with that pipe so I am about of options. Someone will chime in I'm sure
Never used heat wrap. You know where to get it. I think that might workCould wrap it?
u'll need...imo ...to open up the rear around the pipe as i did on my body?The body fits, but I'm afraid of it getting hot enuff to melt the body. Also not sure if it will get to hot and melt or damage the throttle servo arm. It sits about 3/8 of an inch from the arm. I have seen before other guys using this pipe. Not sure I like it.
Thank you Jshaff16 and everyone else, lots of good ideas. You guys are Awesome. Just did a couple off heat cycles on my OBR Engine. Running great. Just going to paint and use heat wrap. Should be fine.
That's normal . Mine is also close to the servo but is not going to damage your servo at all. The exhaust will slightly touch your body and you need to use heat resistant tape like i did.
I used this but I am sure they are cheaper ones on Amazon.
Heat-Shielding Aluminum Foil Tape, 2" Wide, 15 Feet Long
https://www.mcmaster.com/7613A42
View attachment 69096
Thank you niz55, that's what I'm going to do thanks for your help.That's normal . Mine is also close to the servo but is not going to damage your servo at all. The exhaust will slightly touch your body and you need to use heat resistant tape like i did.
I used this but I am sure they are cheaper ones on Amazon.
Heat-Shielding Aluminum Foil Tape, 2" Wide, 15 Feet Long
https://www.mcmaster.com/7613A42
View attachment 69096
I just ordered a roll from ddm, thank you Jshaff16 for sending me the link.I must be the odd one out...didn't do anything above and beyond. Different pipe tho
I just ordered a roll from ddm, thank you Jshaff16 for sending me the link.I must be the odd one out...didn't do anything above and beyond. Different pipe tho
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.