- Thread starter
- #41
Can’t be doing that now can I ? too pretty
Losi 5T RCMAX 50GT build
- Thread starter Zephyr
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Can’t be doing that now can I ? too pretty
The fella who built this 5iveT did a killer job man!
Such a sick build ?????
Such a sick build ?????
- Thread starter
- #43
Great base to start from
I'm gradually adding my own touches and improving on whats been done.Re-uploaded in 4k for anyone thats interested
- Thread starter
- #44
- Thread starter
- #45
Few more bits arrived today Full force front chassis plate to match the rear, their servo clamps and the +10hp blue ddm gas cap ?
Full force front chassis plate to match the rear, their servo clamps and the +10hp blue ddm gas cap ?
Servo braces are sweet ? bought a few set now luv em?
- Thread starter
- #47
I need to get a spacer for under the servo, its touching the chassis and sitting proud above the radio tray lol
Ive had to use both braces on the steering servo for now until I can get a carbon spacer from CCR 
Dug the DBXL out ?
https://www.largescaleforums.com/threads/losi-dbxl-34cc-obr-full-mod-reed-build.25312/#post-278663
Attachments
Last edited:
- Thread starter
- #48
Unfortunately one of the shocks has started to leak, I’m going to change the shock oil all round while I’m at it.
What weight would you guys recommend? I’ve seen people suggest 50wt for the rear and 70wt for the front, thicker at the front because it can be a be springy when all the weights at the back?
What weight would you guys recommend? I’ve seen people suggest 50wt for the rear and 70wt for the front, thicker at the front because it can be a be springy when all the weights at the back?
Do 50 all around ??
- Thread starter
- #50
Cheers mate, I’ve just had a close look round and all of them are weeping a little, seems like a common problem on these IRC shocks from what I’ve been told on Facebook ?
John Parks
Print my own
- Messages
- 4,151
- Reaction score
- 9,680
Most all shocks weep a little, especially as time goes on and they wear. None of mine though leak or drip.
I have x2 sets IRC shocks and then don't weep?
you need the shock tool from them and the you sorted??
- Thread starter
- #53
There was a puddle in the bottom spring landing
I have x2 sets IRC shocks and then don't weep?
What tool is that mate?
The tool on the flywheel is an irc shock tool??????????
- Thread starter
- #55
Cant find it on their website maybe they don't make it anymore
- Thread starter
- #57
Last edited:
- Thread starter
- #58
Another quick question, this throttle servo brace, would you say the servo should be underneath this or on top? The servo is on top at the moment but the brake rods are angled down and binding a little because the servo is much higher than stock Not sure if that's just how they are or its been fitted the wrong way around
Not sure if that's just how they are or its been fitted the wrong way around
i don't have that brace ? but id say servo under like mine?
- Thread starter
- #60
I did think that as its actually clamping the servo then, ill try it that way around & see what happens