- Messages
- 8,403
- Location
- Bristol uk
Furr enuff
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Might get a water cooled isolator and add a radiator and fan 1/10th scale and a nitro fuel tank to feed the water mounted at the back not sure tho there is spaceBasically a replacement of the plastics on the engine minus the top because the exhaust is a tight fit I'll need to vent the pullstart some more aswell
Sent from my SM-N960F using Tapatalk
Thanks I think that's me finished now just need alloy wishbone holders and the mcd open clutch housing and to weld the crack in the exhaust then I can just enjoy the rc car rather than working on it all the timeNice fab work!
Good job ?Done finally from the amount of air coming out over the exhaust header I do t need to do anymore work .
Just adjusted the endpoints on my throttle servo aswell found it was too high and throttle started about quarter trigger
Sent from my SM-N960F using Tapatalk
20180506_154756 by evssv, on FlickrMight get a water cooled isolator and add a radiator and fan 1/10th scale and a nitro fuel tank to feed the water mounted at the back not sure tho there is space
Sent from my SM-N960F using Tapatalk
Wonder if that fits under the stock body ?
Definitely will add wieghtProbably without the cage but will add weight
Sent from my SM-N960F using Tapatalk
He could have saved so much space with all 1/10 scale parts I'm thinking of wrapping copper tubing round the header connecting a pump and a radiatoryeah I didnt see the owner.......we was on a wonder around b.fest last may and I spotted it and thought wtf.... ......[emoji23]
Congrats! ???Today is the best day ever had a 30 minute carpark run after heavily ramping the piston no heat issues rpm was higher than it's ever been I recommend those esp ramped pistons highly even tho I did mine myself all I gotta do is stock up on rovan 45cc engine parts for when it does finally give but for now it's running like I 60cc or so .so much power and speed shame all 4 tires couldn't keep up
Sent from my SM-N960F using Tapatalk
I had heat issues before but the speed the fan is spinning now is blowing like a hair dryer keeping it cool when it's running but kept spin ing tires I would love to dyno it tho it sounds like a ported 23cc it screams but loudly like it should be an 5th scale formula one car not a rally carNeed them brps tho [emoji48] build a Dyno and see the numbers she's putting out. I'd think, 13.5-16hp [emoji48]
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.