whats you got coming?
My HPI 26 Baja 5b SS
- Thread starter evssv
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
not much bud. I was referring to evssv build.
iv only go the 5ive-b brushless conversion build coming Next month. ?
- Thread starter
- #343
yeah was mank ?
dun know tbh?
jus got 4quid off this?
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/173688115533
plus i run the v1 tr plate so this made sense?
Last edited:
That's a good deal right there ????
- Thread starter
- #345
jus aswell i pulled the diff...1x baked out and the other 3x loose 
Holly sh!te??? lucky to find that????
- Thread starter
- #347
yeah?...I put 50k cst oil in....?
box and header now sorted?
and jus piked upthese bart discs ?seeing as mine r rather feked?
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/174074031337
box and header now sorted?
and jus piked upthese bart discs ?seeing as mine r rather feked?
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/174074031337
going in hard....
Last edited:
You had your diff in the wrong way around Mikejus aswell i pulled the diff...1x baked out and the other 3x loose
- Thread starter
- #349
really?
hhmm.?..need a new clutch in there i reckons?
cant get that side hex out the pd brace☹..nuts jus spinning in the placstic bit ffs
Last edited:
- Thread starter
- #350
oops 
- Messages
- 19,475
- Reaction score
- 27,691
I think that's a bit worn ?oops
Whats the bell look like?
- Thread starter
- #353
swap out the irc for the phat dad one?
braces on?
still feels smooth..?despite the look
braces on?
Last edited:
- Thread starter
- #354
not much left to fit now?..plus pipe obv....an a clutch 
........
and bak end is done allbar the hubs n shafts?
glad i tore into when i did or may of exploded another diff
........and bak end is done allbar the hubs n shafts?
glad i tore into when i did or may of exploded another diff
- Messages
- 19,475
- Reaction score
- 27,691
What clutch yougunna go with? Standard? FS? I'm Gunna have an FS in mine ??not much left to fit now?..plus pipe obv....an a clutch
and bak end is done allbar the hubs n shafts?
- Thread starter
- #356
see if i got anything here first...?..but i thk there all sub 32cc ones i got ?
sure the 32 runs a slighty different clutch ?
sure the 32 runs a slighty different clutch ?
- Messages
- 19,475
- Reaction score
- 27,691
Hey all I say is no "coal dust clone clutches" ??
- Thread starter
- #358
I'll chuck in what i got ?
- Messages
- 19,475
- Reaction score
- 27,691
No I think they are all the same ?
- Thread starter
- #360
I'm sure the 2x bolts holding clutch to the holder come in 2x different sizes?
so I'll need the correct bolts to match?
so I'll need the correct bolts to match?