sperera
Well-Known Member
- Messages
- 3,645
- Location
- Australia, Melbourne
aaean has hit it on the head, something is causing allot of resistance in drive train. with engine off can you push it by hand does it roll smoothly and freely?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
at a guess somthing is binding in your gears causing your clutch bell to seize up and the clutch is just burning out. that or the engine is not 100% dead on center to the clutch bell (more than likely the first one)
whats the chain drive etc like under load? if its binding up alot it could be your issue
how much clearance is there between the main spur shown and that blacking plate is sits next to (looks pretty cose)?
measure it cold then measure it when its warm (use a hair dryer or a hot air gun)
could it just have been way over geared and stressing the clutch?
the suspension is working great. I think it is over geared a bit, bit in that first video at 51 seconds there is a heck of a loud noise when you hit the brakes. is that chain a bit tight?
I am impressed to hell with this build and just tossing out ideas to check is all.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.