Upgraded transfer port covers?
- Thread starter Rep732
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 17,175
- Location
- Crafers South Australia
What gearing do you have
?
?
- Messages
- 17,175
- Location
- Crafers South Australia
Put a 21 ? this is the sweet spot on a losi5 32/34cc vertigo make a hex bell and pinions that go with it ? its a top upgrade http://885035.shop.netsuite.com/s.nl?c=885035&n=1&it=A&id=9535
- Messages
- 13,105
Yes
- Messages
- 17,175
- Location
- Crafers South Australia
Yes don't touch the spur? i have this on my losi along with their open clutch housing?
- Messages
- 17,175
- Location
- Crafers South Australia
Iv had a zen clutch in the losi 2 years now and is still great ? id only upgrade when the stock one is feked?
- Messages
- 13,105
Stay the fek away from that abortion! Seen too many threads about how they heat up, warp and in general not work as intended.
jkoppk
Well-Known Member
- Messages
- 241
- Location
- Mcsherrystown pa.
My son has the 21t and I still have the stock 20t on mine and we really didn't notice a difference. I think we are going to get 22t or 23t to try.
- Messages
- 17,175
- Location
- Crafers South Australia
You will find that you'll start loose low down torque ?
- Messages
- 17,175
- Location
- Crafers South Australia
21 is the sweet spot??
jkoppk
Well-Known Member
- Messages
- 241
- Location
- Mcsherrystown pa.
Maybe we would see the difference on asphalt but not dirt and grass where it spins.We tuned both and raced side by side 10+ times and always dead even.