- Messages
- 19,475
- Reaction score
- 27,691
hate that when that happens. for me its more like, the stuff i need never goes on sale ?
Evssv's Losi 5B
- Thread starter evssv
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #362
he got blue...purple...yellow...
no...jus cut to length... screw on ....heat shrink the black bit provided ...job done...
https://silverbackrcproducts.com/index.php?route=product/product&path=93&product_id=1393
thank ill get one ordered
- Thread starter
- #364
Forgot i ordered this?
- Thread starter
- #365
And it should b in my baja thread??
- Thread starter
- #366
Thk u ddm dotd?...
And a 23-30.5cc clutch tool off eBay ?..now i jus needa 32+ one?
And a 23-30.5cc clutch tool off eBay ?..now i jus needa 32+ one?
Nice haul
- Thread starter
- #369
Thks dude?.....Nice buy?....feel free to do a build thread..?....
Oh what fun!!!!! Another 5b kit to join the crew y post loads of pics in your build thread
Cheers bud, iv got everything to get it built now so will begin the build this evening. Il be sure to get a build thread up.
Oh what fun!!!!! Another 5b kit to join the crew y post loads of pics in your build thread
Thanks bud, iv had a read of your build thread too. All you guys on here with the build threads have done an excellent job of your 5ive b’s
Btw how long did it take you to get it built up?
Didnt rush it mostly built at night for a few hours but if i added up all the time 10-15 hours +-
- Thread starter
- #373
Took 5b out today ? but I'd still not replaced the busted plug cap.?..so it only lasted 1 tank until the brass bit fell off..?..u can see whats left of it here...bit of red on end of wire ffs 
Took 5b out today ? but I'd still not replaced the busted plug cap.?..so it only lasted 1 tank until the brass bit fell off..?..u can see whats left of it here...bit of red on end of wire ffs
What wheels and tyres are those bud? Do they fit okay without axle extenders etc?
- Thread starter
- #375
They r hpi 5sc silver bak gorilla rims/beadlocks..?...and 5sc proline trencher's?....and they fit fine..?.but its very close
as per pics a few pages bak?
- Thread starter
- #376
Soo....get the important things out the way first....pint of rum n coke 
...
Now in me 2nd pint. ?
Thought i may aswell fit me bart while the engine is out ?
I Used a proper gasket rarher then the supplied paper one...?...wasn't keen with it so close to the pull start ?
...
Now in me 2nd pint. ?
Thought i may aswell fit me bart while the engine is out ?
I Used a proper gasket rarher then the supplied paper one...?...wasn't keen with it so close to the pull start ?
Last edited:
That’s the issue I have found with most pipes.only pipes I have seen that do not come close to the pull start is the victory rc and the samba pipe.
- Thread starter
- #378
Yeah agree...?.
Needs spacing here imo
Found a perfect ally spacer☺
Fits sweet..and used a nyloc instead of the nut bart included ?...stupid imo they don't use nylocs?
Done
Used a cable tie to keep my already deformed handle off the pipe.....i can still pull it at a straight angal still?
The pipe was sitting naturally exactly there ?...so hopefully i wont get a failure like doug did?.....
And i now have way more clearance on the servo horn☺..
https://flic.kr/p/2em44Zo
.but less on the rear of the rx lid...☹.
https://flic.kr/p/2em44Zy
.ffs if it ain't one thing its another?
Needs spacing here imo
Found a perfect ally spacer☺
Fits sweet..and used a nyloc instead of the nut bart included ?...stupid imo they don't use nylocs?
Done
Used a cable tie to keep my already deformed handle off the pipe.....i can still pull it at a straight angal still?
The pipe was sitting naturally exactly there ?...so hopefully i wont get a failure like doug did?.....
And i now have way more clearance on the servo horn☺..
https://flic.kr/p/2em44Zo
.but less on the rear of the rx lid...☹.
https://flic.kr/p/2em44Zy
.ffs if it ain't one thing its another?
Last edited:
I find with my bart pipe it sits extremely close to the throttle servo like yours, half way into a tank my steering servo becomes very hot. The first time i checked it was after i had already been running half an hour and the throttle servo was almost too hot to touch. But that noise it makes is awesome!
- Thread starter
- #380
my samba was touching the horn and was alot closer to the servo then the bart is now...?.the samba was so close i had to file the corner of the horn.....but it never stopped it working in anyway even though thetes a rub mark on the pipe...
Yeah my bart xp on me 34 sounds sweeeet as
Well wouldn't u ....
.....but it never stopped it working in anyway even though thetes a rub mark on the pipe... Yeah my bart xp on me 34 sounds sweeeet as
Well wouldn't u ....
Last edited: