[Identified HARM SR1]Help identify 1/5 GT car

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
The boat needs painting, i aint like it like this.
Most probably black with flames or a pearl color ? or white pearl with some casino cards paintjob?? anyways the only sure is that u will paint it ??
To be honest i will buy the second engine only because the pipe ??
 
Last edited:
So i finally got the boat :cool::love:
78A25678-F86E-45AA-A52D-0F94A29D9754.jpegDDAE315C-4C17-48AA-BCB8-360E50EE1A76.jpeg8D3C2A5D-B145-4D07-82F0-40764221280A.jpeg
Also i found another used gas boat engine + pipe for 30€ and i bought it ?, the seller said that it has low compression so i bet on piston ring replacement xD if not then i will salvage whatever i can get from it. Mostly i wanted it for the pipe ?

1A8F2A67-97D3-4B11-88B5-FBF7783DFC71.jpeg
It doesn't look like for zenoah tho. ?
 
UPDATE:
Ok so at the summer i was super busy, now i have a lot of free time to test things out.
So i took the cylinder from the boat engine (with the low compression) and it bolts on on the zenoah g230rc.
I was so excited for this and i started diggin my old chainsaws and old engines....i got a good piston and piston ring and installed them and bolted on the cylinder, till i notice that there was no place to bolt the coils:ROFLMAO: so i decided to take out the stock flywheel and install ta small one from the boat but it didn't fit....it actually had contact with the zenoah's crankcase without even to bolt it on....so i was again in a dead end. So for now i try to figure out what else i could try xD maybe take a new boat engine and put it on ? xDDD
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks