LOSI 5ivet 2.0

[Seandonato73]

yeah agree☹ but they add alot strength to the body when used ?

Still not worth the hassle, imo. If they were quick release or held in with a pin of sorts, I would, but dam they are a massive pain.

 

[Relic-1]

I've used three of the small tubes on the hood piece so far , I got three big tubes today see if I can do the rest with that , keep nd of a fun project actually

 

[evssv]

body panels will last waaaaay longer now u goo'd em?
double up were the tyres hit inside the arches ?

 

[Relic-1]

I got the body tough as nails , wow ! That stuff is tough , ! Now I'm doing the killer bee Killswitch , I'm not understanding the routing of the grey wire , where everybody putting this thing

 

[misterleon]

I got the body tough as nails , wow ! That stuff is tough , ! Now I'm doing the killer bee Killswitch , I'm not understanding the routing of the grey wire , where everybody putting this thing

I run it in the carb side under the engine, drive shaft and battery tray then plug it in

 

[Relic-1]

More like 4 or 5 ?

 

[Rep732]

Just run it in a way to keep it from getting caught on any rotating objects... I routed mine on the exhaust side using the bolt holes on the fan cover and engine block and used some cable holders

 

[Relic-1]

So you drilled a hole , added a gramet , that's what I did to my Vekta 5 , but nobody is mentioning drilling a hole , medic just ran it through the motor ? I don't get that , how ? Gotta drill a hole from what I'm seeing

 

[Rep732]

Its just how I wanted to run it ... the picture was just for reference lol. Yes I drilled a hole and added a grommet because I don't want the wire rubbing on the engine fins. I tend to beat to my own drum sorry

 

[Relic-1]

PERZACHLY ! I don't see how they put it through the motor I tried , but I shaved a hole in the side of the top plastic shroud , to fit the wire through , right where it meets the metal , worked great

 

[Rep732]

Looks good ?

 

[misterleon]

You can run it between the intake port and flywheel without cutting a hole and then just run it under the engine

 

[Seandonato73]

Your way over thinking it


No hole needed

 

[crucialRC]

Your way over thinking it
View attachment 67199

No hole needed

Exactly??

 

[Rep732]

Sorry I'm a perfectionist ?‍

 

[Relic-1]

Anyway , I'll be heading to the other side of the vehical now , where the dreaded ( ! ELECTRICAL ! ) IS done , I always fail miserably at this , but here goes , I geuss I need to reprogram the switch for lipo 2s ? Oh boy ,,,,,,,, I'll give r a go and prolly call you later ?

 

[Rep732]

I don't have killer bee but setting kill switch function is the same process. What transmitter are you using?.

 

[Relic-1]

Spektrum dx5c

 

[Rep732]

Thats easy to setup. Go into aux settings and setup the channel you want and for the switch I went with G as its closest to your thumb. Set it as momentary active. Rebind the radio while your holding full brake and holding the G button down. And your set

 

[Relic-1]

That is freekn AWSOME INFO !!! thanks I'll give it a try when I get back from tearing down a garage , to be able to afford upgrades on the raminator , I need a wheelie bar , do I bind transmitter before setting , lipo cutoff , and Killswitch switch on transmitter ?