New to forum and 5th scale

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
As in new servo too wide doesn't fit into slot old servo came out of.

Except the new servo case is just too wide for what I can only assume is the stock mount. Spacers aren't going to help that.
I was talking about height, but I was running a savox 0236 servo for steering in my dbxl. Never an issue with it. Break out the grinder, you should be able to make it fit mate.
 
I was talking about height, but I was running a savox 0236 servo for steering in my dbxl. Never an issue with it. Break out the grinder, you should be able to make it fit mate.
Got it in no grinding.....took some doing wow.
Thanks for the help
Working out some fitment issues with this jetpro pipe and cage. Oh and painting the body while I wait for parts.
 

Attachments

  • 20210329_153031.jpg
    20210329_153031.jpg
    156.9 KB · Views: 8
  • 20210329_153050.jpg
    20210329_153050.jpg
    71 KB · Views: 8
Still waiting on arms axle extenders all new cvd boots finishing up with the body panels just waiting on another sticker sheet before I put it all back together.
 

Attachments

  • 20210403_120753.jpg
    20210403_120753.jpg
    170.9 KB · Views: 4
Couldn't wait I say it looks better than the boring stock graphics.
 

Attachments

  • 20210403_134217.jpg
    20210403_134217.jpg
    208.9 KB · Views: 7
Update
killswitch is in still waiting on this tbone racing front bumper the axle extenders and servo spacer for hitec steer servo before I can run it. Realized I need a 3 channel radio for killswitch as well. I'll likely just pu a used spektrum tx locally I have a few 3 channel rx already.
 

Attachments

  • 16186958043412461732369500110372.jpg
    16186958043412461732369500110372.jpg
    124.2 KB · Views: 3
I had no issues installing killswitch's on spektrum radios and I have experience with killer bee (relic-1) and myself along with a few others here with dynamite k/s... need help pm me and ill walk you through it
Thanks appreciate that.
Got bigger fish to fry now lol. Looks like I'm replacing centre diff carrier and front centre cvd due to wear. Anyone with any experience with either the fid setup or gtb carrier mount and brake setup? Both run about the same coin.

 

Attachments

  • 16187435740601850880173603059535.jpg
    16187435740601850880173603059535.jpg
    147.4 KB · Views: 6
I liked the fid stuff when I had a dbxl.
Thanks I have their 2 speed but have yet to install and test
Fitment of this 2 speed is pretty good. Have to use washer spacers on back of clutchbell carrier to get mesh right.
Waiting on a pile of new parts over the next few weeks. Haven't recieved my tbone bumper yet ordered that back in march lol. With any luck I may get to run this again this year.
This clutchbell looks finished to me what do you guys think?
 

Attachments

  • 20210418_083845.jpg
    20210418_083845.jpg
    97.4 KB · Views: 6
  • 20210418_085152.jpg
    20210418_085152.jpg
    99.9 KB · Views: 7
  • 20210418_085146.jpg
    20210418_085146.jpg
    81.3 KB · Views: 6
Last edited:
Tbone Racing bumper showed up finally...Wrong color lol. Ordered black could have lived with red and blue showed up. Scuffed it up and hit it with the krylon...not sure if it will hold up. It should be noted this bumper does not bolt up to cage will post pics of what I mean when it dries and I can install it.
 

Attachments

  • 20210421_170508.jpg
    20210421_170508.jpg
    109.8 KB · Views: 3
  • 20210421_170457.jpg
    20210421_170457.jpg
    108.3 KB · Views: 3
Will be removing whats left of stock bumper.
That bumper looks alright....be better with some light pods though..
Picked up some red blingy turnbuckles and steering links waiting on my daves order now.
 

Attachments

  • 16190497438156634873563851395386.jpg
    16190497438156634873563851395386.jpg
    130.1 KB · Views: 3
  • 16190497800938654889617602633508.jpg
    16190497800938654889617602633508.jpg
    120.8 KB · Views: 3
  • 16190501627533214638150639780588.jpg
    16190501627533214638150639780588.jpg
    212.6 KB · Views: 3
Picked these up used locally. They look pretty but are not going to last. Much smaller diameter rod ends than the irp links.
 

Attachments

  • 20210424_185630.jpg
    20210424_185630.jpg
    154.4 KB · Views: 4
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks