Z's HPI Baja 5b/5t build

[crucialRC]

It's also the deal of the day, today??

So my gas I have here is 7 months old, the tank is sealed, there's ethanol in it, but it was sealed, stored in a cool environment, there's Klotz supertechniplate in it, do I trust it for a heat cycle of 2 ?

I would run it.

 

[Z.hb71]

It's also the deal of the day, today??

I would run it.

Thing I might send it ?
Currently editing tho, not gunna be spectacular tho ?

 

[crucialRC]

Thing I might send it ?

?What?

 

[Z.hb71]

?What?

"Think I might send it" as in run the gas

 

[crucialRC]

"Think I might send it" as in run the gas

Oh gotcha. Did you see my other post about that stack is one of the items for today's dotd?

 

[Z.hb71]

Oh gotcha. Did you see my other post about that stack is one of the items for today's dotd?

Yep I saw that. ? If I had $$ I would, the motor parts did a number on my wallet ??

 

[Z.hb71]

Alright so I went to start it and there's no spark, so it wouldnt even cough (obviously), so there's a problem to be resolved, as usual lol. Even unplugged the ks and nothing so there's something up with the coil

 

[AnubisBC]

gapped properly and all that jazz?

And BTW, no, the Shredstack will not work with the Uni filter. It's designed to work with the stock HPI filter housing. The ring from the filter assembly clamps everything together. I have one an will be happy to take some extra pics so you will be able to see what I mean if you want.

 

[Z.hb71]

gapped properly and all that jazz?

Yep. Used the tool and everything

 

[AnubisBC]

Yep. Used the tool and everything

Well dammit! You don't have a remote killswitch plugged in, do ya?

 

[Z.hb71]

Well dammit! You don't have a remote killswitch plugged in, do ya?

Nope I disconnected that. Check the ks and I wired it correctly. It might be the coil tho, or the spark plug cap I installed

 

[AnubisBC]

Yeah, you're no newb at this. You'll figure it out!

 

[DougStar]

Got return and feed fuel lines the right way? Also make sure the lugs ont the coil are right? carb gasket pulse hole lines up....... but you have checked those right?

 

[Z.hb71]

Got return and feed fuel lines the right way? Also make sure the lugs ont the coil are right? carb gasket pulse hole lines up....... but you have checked those right?

Yep all right, just no sparky ?

 

[DougStar]

Make sure the cap and the ht leads are all sweet? theres like a copper coil thingy connects the two?

 

[Z.hb71]

Make sure the cap and the ht leads are all sweet? theres like a copper coil thingy connects the two?

Double checked the connections to the coild, off switch, and ks lead all is good there I think. Gunna check the plug lead and if that's fine then the coil is faked ? not too upset if that's the case, cuz were early ?

 

[crucialRC]

Watching your video now. Looks like too much space between the coil and flywheel bro. Might want to check that. Also make sure the stop button isn't stuck.

 

[Z.hb71]

Watching your video now. Looks like too much space between the coil and flywheel bro. Might want to check that. Also make sure the stop button isn't stuck.

Botton is fine, used the gap gauge from ddm so the gap should be perfect ?

 

[crucialRC]

Nah look at 11:36. Gap looks too big to me, but ok. When I do it I put the flywheel magnet directly under the coil with the gap tool in between and pull down on the coil while tightening the screws but if your good then I'm good??

 

[Z.hb71]

Nah look at 11:36. Gap looks too big to me, but ok. When I do it put the magnet under the coil with the gap tool and pull down on the coil while tightening the screws but if your good then I'm good??

I'll try again and check it out ?